info@rescueboatdavit.com- 0530 662 66 45
Telescopic Davit
A compact rescue boat davit with a three-stage telescopic boom. It retracts flush under the deck above or along the ship side and extends outboard only when the boat is launched — ideal where deck space and air draft are limited.

A telescopic davit replaces the swinging arm of a conventional davit with a straight boom that extends and retracts. Because nothing swings across the deck, the davit needs very little free space and can be mounted overhead, bolted under the deck above the boat, or on a deck pedestal with slewing.
Inside the boom, two telescopic hydraulic cylinders drive the second and third sections, sliding on low-friction wear pads. The winch is mounted on the boom, and the wire is led over root, deflection and head sheaves to the hook. When the boom is extended, the boat hangs clear of the ship side and is lowered by the winch; on recovery the sequence is reversed.
Key features: Telescopic Davit
- Three-stage telescopic box boom with internal hydraulic cylinders
- Overhead mounting under the deck above, or deck pedestal with slewing
- Boom-mounted winch with fail-safe brake and gravity lowering
- Low-friction wear pads and sealed sheaves for long service life
- Hydraulic accumulators for emergency boom retraction and extension
- Limit switches for boom end positions and hook upper limit
How it works
- StowedThe boom is retracted and the boat is stowed under it in its cradle.
- HoistThe winch lifts the boat clear of the cradle.
- ExtendThe telescopic cylinders push the boom outboard until the boat clears the ship side.
- Lower & releaseThe winch lowers the boat to the water and the off-load hook is released.
- RecoverThe boat is hoisted, the boom retracts and the boat is landed back in the cradle.
Technical data
| Parameter | Value |
|---|---|
| Boat type | Rescue boat / fast rescue craft |
| Typical outreach | 3 – 7.5 m (boom extended) |
| Safe working load | 15 – 60 kN |
| Boom | 3-stage telescopic box section |
| Mounting | Overhead (under deck) or pedestal with slewing |
| Drive | Electro-hydraulic, winch on boom |
| Emergency | Accumulator operation, gravity lowering on brake |
| Design basis | SOLAS Ch. III, IMO LSA Code, class rules |
Typical configuration. Final values are confirmed per project after the boat, deck height and class requirements are known.


Applications
- Yachts and passenger vessels
- Patrol and naval vessels
- Ferries and Ro-Pax ships
- Offshore and research vessels with limited deck space
Frequently asked questions
When is a telescopic davit better than an A-frame davit?
When deck space or headroom is limited. The telescopic boom moves in a straight line and does not swing across the deck, so it can be fitted in a recess or under an overhang where an A-frame would not fit.
Can a telescopic davit slew?
Yes. In the pedestal version the boom sits on a slewing bearing, so the boat can be slewed outboard as well as extended. The overhead version normally works with telescoping only.
How is the boat recovered if hydraulic power is lost?
Hydraulic accumulators store enough energy to move the boom, and the boat can always be lowered by gravity on the winch brake.
What maintenance does the boom need?
Periodic inspection of wear pads, sheaves, wire rope and cylinders, plus the annual and five-yearly examinations and tests required for launching appliances.
Related davit systems

Fast Rescue Boat Davit
A-frame luffing davit for FRBs and rescue boats, built to recover the boat quickly in a seaway.
View →
Side Roller Davit
Roller-type side launching davit: the boat rolls outboard on a carriage, with no swinging arms.
View →
Lifeboat Davit
Gravity luffing lifeboat davit with two pivoting arms and an electric winch for enclosed lifeboats.
View →Tell us about your vessel
Send the boat type, boat weight with persons, deck height above the waterline and the class society. You will receive a davit proposal with general arrangement and a delivery schedule.
