Davit systems

Free Fall Lifeboat Davit

A launching system for free-fall lifeboats: an inclined ramp from which the enclosed lifeboat slides and drops clear of the stern, and a hydraulic A-frame that recovers the boat and lowers it for drills.

Free Fall Lifeboat Davit with orange rescue boat – 3D render

A free-fall lifeboat is launched by gravity alone. When the coxswain releases the stern hook from inside the boat, the boat slides down the rollers of the ramp and drops into the sea, moving away from the ship at once. No winch, power or deck crew are needed, which makes free-fall the fastest way to abandon ship.

The same boat must also be lowered and recovered without free-falling — for maintenance, drills and after use. For this the system has a luffing A-frame with two hydraulic cylinders and a winch with a two-fall hook block. The A-frame picks the boat up from the ramp, luffs it outboard over the stern, and lowers it to the water under control.

360° 3D model, rendered from the engineering CAD
Key features

Key features: Free Fall Lifeboat Davit

  • Welded launching ramp with roller tracks and adjustable launch angle
  • Stern release hook operated from inside the boat
  • Hydraulic luffing A-frame for recovery and secondary lowering
  • Arm-mounted winch with two-fall hook block
  • Boarding platform with handrails and caged ladder
  • Hydraulic power unit with emergency hand pump
How it works

How it works

  1. StowedThe lifeboat sits on the ramp rollers, held by the stern release hook.
  2. EmbarkPersons board through the stern door and strap in.
  3. Free-fall launchThe coxswain releases the hook; the boat slides down the ramp and drops clear.
  4. Controlled loweringFor drills, the A-frame lifts and lowers the boat on the winch instead.
  5. RecoverThe A-frame hoists the boat and lands it back on the ramp.
Technical data

Technical data

ParameterValue
Boat typeTotally enclosed free-fall lifeboat
Typical boat length6.5 – 10 m
Safe working load (A-frame)40 – 120 kN
Ramp angleApprox. 30 – 35°
LaunchGravity free-fall, release from inside the boat
RecoveryHydraulic A-frame + winch with two-fall block
StructureWelded steel ramp and A-frame, marine coating
Design basisSOLAS Ch. III, IMO LSA Code, class rules

Typical configuration. Final values are confirmed per project after the boat, deck height and class requirements are known.

Free Fall Lifeboat Davit – 3D engineering render with orange boat
Free Fall Lifeboat Davit – rear three-quarter view
Applications

Applications

  • Bulk carriers and tankers
  • Offshore installations
  • Chemical and gas carriers
  • Special-purpose ships
FAQ

Frequently asked questions

How does a free-fall lifeboat launch?

The coxswain releases the stern hook from inside the boat. The boat slides down the ramp and falls into the sea, moving away from the ship under its own momentum.

Why does a free-fall system need a davit?

The boat must also be recovered after use and lowered without free-fall during drills and maintenance. The luffing A-frame and winch do this.

What determines the ramp angle and height?

The certified free-fall height of the boat, the lightest seagoing waterline and the trim and list conditions of the ship. The ramp is designed so the boat clears the ship in all required conditions.

Can the system be used for simulated launching?

Yes. Simulated launching on the A-frame lets crews practise without dropping the boat.

Tell us about your vessel

Send the boat type, boat weight with persons, deck height above the waterline and the class society. You will receive a davit proposal with general arrangement and a delivery schedule.

Request a quotation →