Davit systems

Lifeboat Davit

A gravity luffing davit with two pivoting arms that lowers a totally enclosed lifeboat with its full complement — by gravity alone — and recovers it with an electric winch.

Lifeboat Davit with orange rescue boat – 3D render

Gravity davits are the standard launching appliance for totally enclosed lifeboats on merchant ships. Two arms, one at each end of the boat, pivot on the davit frames. When the winch brake is released, the weight of the boat swings the arms outboard until the boat hangs clear of the ship side, and then the boat is lowered on two falls to the water.

Lowering speed is held within the limits of the LSA Code by a centrifugal brake in the winch, and the operator can control the descent from the deck or from inside the boat with a remote wire. Recovery uses the electric winch; limit switches stop the hoist as the arms reach the stowed position, and a hand crank is provided as back-up.

360° 3D model, rendered from the engineering CAD
Key features

Key features: Lifeboat Davit

  • Two pivoting davit arms on welded frames with boarding access
  • Electric winch with centrifugal brake and fail-safe holding brake
  • Remote-controlled lowering from inside the lifeboat
  • Two falls with sheaves and on-load release hook compatibility
  • Limit switches and hand-crank back-up for recovery
  • Tricing and bowsing arrangement for embarkation at deck level
How it works

How it works

  1. StowedThe lifeboat is held in the arms at deck level, secured by gripes.
  2. Swing outThe brake is lifted and the arms pivot outboard under the boat's weight.
  3. EmbarkThe boat is bowsed in to the embarkation deck and persons board.
  4. Lower & releaseThe boat is lowered on two falls and released on the water.
  5. RecoverThe electric winch hoists the boat and the arms return to the stowed position.
Technical data

Technical data

ParameterValue
Boat typeTotally enclosed lifeboat
Typical boat length6 – 10 m
Safe working load40 – 120 kN
LoweringGravity, centrifugal brake, remote control
HoistingElectric winch, hand-crank back-up
FallsTwo falls, on-load release hooks
StructureWelded steel, marine coating
Design basisSOLAS Ch. III, IMO LSA Code, class rules

Typical configuration. Final values are confirmed per project after the boat, deck height and class requirements are known.

Lifeboat Davit – 3D engineering render with orange boat
Lifeboat Davit – rear three-quarter view
Applications

Applications

  • Bulk carriers, tankers and container ships
  • Offshore accommodation units
  • Passenger ships
  • Newbuildings and lifeboat davit replacement
FAQ

Frequently asked questions

How fast does a lifeboat davit lower the boat?

The LSA Code sets the minimum lowering speed as 0.4 + 0.02H m/s, where H is the height from the davit head to the waterline in metres, and limits the maximum speed. The centrifugal brake holds the speed in that range.

Can the lifeboat be lowered from inside the boat?

Yes. A remote control wire runs to the boat so the coxswain can release the winch brake and control the descent from inside.

Is power needed to launch?

No. Swing-out and lowering are by gravity. Power is only needed to recover the boat.

How often must lifeboat davits be tested?

Launching appliances need an annual thorough examination and a five-yearly operational test, as set out in IMO Resolution MSC.402(96) and SOLAS regulation III/20.

Tell us about your vessel

Send the boat type, boat weight with persons, deck height above the waterline and the class society. You will receive a davit proposal with general arrangement and a delivery schedule.

Request a quotation →