Davit systems

Side Roller Davit

A roller-type side launching davit in which the boat travels outboard on a carriage running on rollers, then is lowered by a winch. Compact, stable and simple — no arms swing over the deck.

Side Roller Davit with orange rescue boat – 3D render

On a side roller davit, the boat is carried on a carriage that rolls along inclined tracks in the davit frame. When the gripes are released and the winch brake is lifted, gravity moves the carriage and the boat outboard until the boat hangs clear of the ship side. The winch then lowers the boat to the water.

Because the boat moves along a guided track instead of on a pivoting arm, the motion is smooth and predictable even when the ship is listing or trimming. Recovery is done by the electric winch, which hoists the boat and pulls the carriage back to the stowed position, where limit switches stop the winch.

360° 3D model, rendered from the engineering CAD
Key features

Key features: Side Roller Davit

  • Roller carriage running on inclined tracks in a welded frame
  • Gravity outboard travel and lowering on the winch brake
  • Electric winch with centrifugal brake and hand-crank recovery
  • Limit switches for the stowed position
  • Low overall height and small deck footprint
  • Galvanised rollers and pins for corrosion resistance
How it works

How it works

  1. StowedThe boat sits on the carriage at the inboard end of the tracks, secured by gripes.
  2. ReleaseThe gripes are released and the winch brake is lifted.
  3. Roll outThe carriage rolls outboard by gravity until the boat hangs clear of the ship side.
  4. LowerThe winch lowers the boat to the water at a controlled speed.
  5. RecoverThe winch hoists the boat and draws the carriage back to the stowed position.
Technical data

Technical data

ParameterValue
Boat typeLifeboat or rescue boat
Safe working load30 – 90 kN
Outboard travelGravity, on roller carriage
LoweringGravity, controlled by centrifugal brake
HoistingElectric winch, manual back-up
FallsTwo falls, on-load or off-load hooks
StructureWelded steel frame, galvanised rollers
Design basisSOLAS Ch. III, IMO LSA Code, class rules

Typical configuration. Final values are confirmed per project after the boat, deck height and class requirements are known.

Side Roller Davit – 3D engineering render with orange boat
Side Roller Davit – rear three-quarter view
Applications

Applications

  • Cargo ships and tankers
  • Inland and coastal vessels
  • Fishing and research vessels
  • Retrofits where a compact davit is needed
FAQ

Frequently asked questions

What is a side launching roller davit?

A davit in which the boat is carried on a roller carriage that travels outboard along tracks before the boat is lowered, instead of being swung out on a pivoting arm.

Does it need power to launch?

No. Outboard travel and lowering are both by gravity, controlled by the winch brake. Power is only needed for recovery, and a hand crank is provided as back-up.

What are the advantages over a gravity pivot davit?

A smaller swept area on deck, lower overall height and a guided boat motion that stays predictable when the ship is listing.

Can it be fitted to an existing ship?

Yes. The compact frame often fits where an older davit was installed, subject to deck structure, boat dimensions and class approval.

Tell us about your vessel

Send the boat type, boat weight with persons, deck height above the waterline and the class society. You will receive a davit proposal with general arrangement and a delivery schedule.

Request a quotation →